Product Description: Orco Blended Scratch & Brown is a dry, factory blended plaster mix specifically designed for the plastering contractor. The control of mix ratio and quality of sand make this a product superior to jobsite mixing. The product is a blend of cement, lime and sand. Available with fibers and a water reducer - Scratch & Brown WRF. Special mix designs also available. Uses: Orco Blended Scratch & Brown is used on lath wall, browning masonry walls or the scratch coat for shower stalls. The same product is used for the first coat (scratch) and second coat (brown).

Advantages:

• Quality Control - a consistent batch every time
• Convenience of handling and transporting one product
• Excellent for multi-story and difficult access jobs
• Systems that save time and money on labor
  

Packaging: Available in 94lb multi wall bags, 3000lb bulk bags or Pneumatic Silo's System. Information on silos and bulk systems available upon request.

Application: Add Orco Blended Scratch & Brown to clean potable water and mix to desired consistency. Application and curing should be outlined in U.B.C. Section 4708 and Table No. 47-F. Coverage rate per 94lb bag for 2 coats is approximately 1- ½ square yards when pumped and 2 square yards when hand applied.

Technical Data: Orco Blended Scratch & Brown conforms to U.B.C. specifications for Portland cement, lime plaster, and A.S.T.M. C-926.

Warranty: The technical information and usage statements are based on our best knowledge. The contents of this specification sheet are presented for informational purposes only and do not constitute responsibility for their use. The manufacturer will replace that material which is proven defective due to quality of the components or the manufacturing process.

Caution: Orco Blended Scratch & Brown contains cementations materials. Prolonged exposure to dust may cause delayed lung disease. Eliminate exposure to dust. Use NIOSH approved mask for silica dust. Freshly mixed materials may cause skin irritation. Avoid direct contact where possible and wash exposed skin areas promptly. If any cementitious materials get into the eyes, rinse immediately and repeatedly with water and get prompt medical attention. See product label, Material Safety Data Sheet, or contact an Orco Blended Technical Service Rep.