| |
Product
Description: Orco Blended Products Paver Joint Sand
is a factory graded, kiln dried, screened and bagged sand.
Specifically designed for use with interlocking concrete paving
stones.
Uses:
Orco Blended Joint Paver Sand is used wherever concrete paver
stones are be installed |
Advantages:
- 94# package reduces waste
- Dry material dispense more easily
- Consistent quality of sand reduces wash or
blowout of joints
Coverage: One
94# bag of OBP Joint Paver Sand covers approximately 100 sq feet.
One 3000# Super Sack will cover approximately 3200 sq feet.
Packaging: This
product comes in 94# bags at 35 per pallet or 3000# Super Sacks.
Applications:
Evenly spread Orco Blended Products Paver Joint Sand over Interlocking
Pavers and then broom into Joints. Sweep away excess sand, then
plate vibrate surface. Repeat this process until joints are full.
Note: Joint Sand is not to be used as Bedding Sand
Technical Data: Meets
all gradation requirements of ASTM C-144 and ICPI recommendations
Under loading hardness helps stop breakdown of sand
No waiting for sand to dry due to oven dry packaging
No wash or blow out of joint sand due to gradation
Gradation increases sealer bond with sand to minimize joint sand
loss
94# bag allows for better calculation of quantity per job, leaving
less wasted material
Gradation for Joint Sand ASTM C-144
| Sieve Size |
Manufactured sand % Passing |
| NO.4 (4.75mm) |
100 |
| NO.8 (2.36mm) |
95 to 100 |
| NO.16 (1.18mm) |
70 to 100 |
| NO.30 (600pm) |
40 to 75 |
| NO.50 (300pm) |
20 to 40 |
| NO.100 (150pm) |
10 to 25 |
| NO.200 (75pm) |
0 to 10 |
|
