PRODUCT DESCRIPTION: Orco Blended Products Deck Mud/Dry Pack is a dry factory blended mortar specifically designed for use by tile and masonry contractors. The product is a thoroughly blended mix of washed plaster sand, conforming to ASTM C-144 and Portland Cement Type II/V conforming to ASTM C-150 specifications. Mix designs available are 3 parts sand to 1 part II/V cement, 4 parts sand to 1 part II/V cement and 5 parts sand to 1 part II/V cement, special mix designs and colors available on request. Uses: OBP Deck Mud/Dry Pac is used as an underlayment for all types of pavers, tile and marble on floors and counter tops, beam pockets, plate imbeds and anywhere a dry pack material is specified.

Advantages:

• Quality control - Factory Blended and consistent batch every time
• Convenience of handling and transporting one product
• Excellent for multi-story and difficult access jobs
• Systems that save time and money on labor

Packaging: Available in 94 lb. sacks, 3000 lb. Bulk Bags, and in Pneumatic Silo's System. Information on bulk bag silos and pneumatic bulk system is available upon request.

Application: Add OBP Deck Mud/Dry Pack to enough potable water so the mortar will form a ball when compacted in your hand. The mortar is compacted and screed into place. Allow for proper cure prior to application of any adhesives. Do not try to accelerate cure with fans. Do not use when temperatures fall below 40 deg F. Use enough water to achieve a workable mix and for proper cement hydration.

Warranty: The technical information and usage statements are based on our best knowledge. The contents of this specification sheet are presented for informational purposes only and do not constitute responsibility for their use. The manufacturer will replace that material which is proven defective due to quality of the components or the manufacturing process. Contact an Orco Blended Products technical advisor on recommendations.

Caution: Prolonged exposure to dust may cause delayed lung disease. Eliminate exposure to dust. Use NIOSH approved mask for silica dust. Freshly mixed materials may cause skin irritation. Avoid direct contact where possible and wash exposed skin areas promptly. If any cementicious materials get into the eyes, rinse immediately and repeatedly with water and get prompt medical attention. See MSDS Data

MSDS Info

Download Acrobat Reader software, and you'll be able to view and print Adobe PDF (Portable Document Format) files.