Product Description: Orco Blended Products Masonry Grout Concrete Mix is a dry, factory blended concrete specifically designed for the professional contractor. The proportioning of raw materials and the thorough blending of the product make it superior to conventional sacked concrete products. Standard mix design available: 2000-70/30: (2000psi*) 6.5 sacks - 3/8"aggregate ( 70% sand, 30% coarse aggregate) 2000- 60/40: (2000 psi*) 6.0 back 3/8" aggregate ( 60% coarse aggregate 40% sand) * Special mix designs available upon request * Uses: Masonry Concrete Mix may be used anywhere a quality concrete mix is required. The 70/30 Grout Concrete Mix is especially suited for grouting masonry cells.

• High Quality
• Convenience of handling one product
• Excellent for multi story and difficult access jobs
• Systems that save time and money on labor

Packaging: Available in 60lb or 90 lb., multi wall paper sack, 3000 lb. Bulk bags, and pneumatic bulk systems. Information on silo and bulk systems available upon request.

Application: Add Orco Blended Masonry Grout Concrete Mix to clean, potable water and mix to desired consistency. One 90lb. bag will yield approximately 1 cubic foot. To achieve strength and slump as stated the recommended water is as follows:
2000 (70/30): 8" slump - approx. 1.4 gal.
2000 (60/40): 5" slump- approx. 1.1 gal.

Technical Data: Orco Blended Masonry Grout Concrete Mix is a mixture of Type II/V cement, 3/8" coarse aggregates, and sand. The mixes conform to City of Los Angeles Building Code, R.R. #25454 and U.B.C. standards for grout proportions by volume.

Warranty: The technical information and usage statements are based on our best knowledge. The contents of this specification sheet are presented for informational purposes only and do not constitute responsibility for their use. The manufacturer will replace that material which is proven defective due to quality of the components or the manufacturing process.

Caution: Prolonged exposure to dust may cause delayed lung disease. Eliminate exposure to dust. Use NIOSH approved mask for silica dust. Freshly mixed materials may cause skin irritation. Avoid direct contact where possible and wash exposed skin areas promptly. If any cementitious materials get into the eyes, rinse immediately and repeatedly with water and get prompt medical attention. See M.S.D.S. Data.

MSDS Info

Download Acrobat Reader software, and you'll be able to view and print Adobe PDF (Portable Document Format) files.