Product Description: Orco Blended Products Latex Glue is a premium mortar additive composed of styrene/butadiene latex rubber and chemicals that produce a high strength, adhesive mortar. It is designed to be added to OBP Thin Brick Mortar. The addition of Latex Glue greatly improves the bond strength, flexural strength, impact resistance, water resistance and freeze thaw stability of the bonding mortar. It may be used for interior or exterior applications over concrete, masonry, cement, plaster, and backer board. Latex Glue and Thin Brick Mortar produce a premium bonding system designed to withstand the extreme conditions exterior veneers are exposed to. Uses: As an additive for OBP Thin Brick Mortar Thin Brick Marble Brick Pavers Terra Cotta Mexican Pavers Concrete Pavers Stone Ceramic & Mosaic Tiles

Advantages:

• High Solid Content
• Premium Bonding
• Durable
• Flexible
• Interior/Exterior
• Water Resistant

Technical Data: Latex Glue added to Thin Brick Mortar meets the requirements of ANSI-1985 Latex Portland Cement Mortar.

Typical Results Are:

Application: For detailed application instructions refer to the appropriate ANSI specifications or OBP literature. Add the dry powder to the mixing liquid and mix with a low RPM mixer to avoid air entrapment. All surfaces must be clean, sound and free from any bond inhibitors. For best results, walls should be parged and veneer back buttered. Veneer must receive full coverage for proper bonding.

Clean Up: Clean tools and spills with water immediately after use. Do not allow material to dry prior to cleaning.

Limitations: Do not apply to frozen or unsound substrates. Do not apply when temperatures are below or expected to fall below 40 degrees F. Latex Glue should not be applied to wood, asphalt sheeting, resilient flooring, particle board, metal, glass, gypsum mortar beds or decorative laminates.

Warranty: The technical information and usage statements are based on our best knowledge. The contents of this specification sheet are presented for informational purposes only and do not constitute responsibility for their use. The manufacturer will replace only that material which is proven defective due to quality of the components of the manufacturing process.

MSDS Info

Download Acrobat Reader software, and you'll be able to view and print Adobe PDF (Portable Document Format) files.